| 1. |
Remove the engine
cover. |
| 2. |
Disconnect the TPS connector(A) and ISA
connector(B).
|
| 3. |
Remove the PCV hose(A) and breather
hose(B).
|
| 4. |
Remove the accelerator cable by loosening the
locknut, then slip the cable end out of the throttle
linkage. |
| 5. |
Remove the delivery pipe(A).
|
| 6. |
Remove the water hoses(A), PCSV(B), and brake
vacuum hose(C).
|
| 7. |
Remove the intake manifold
stay(A).
|
| 8. |
Remove the intake manifold.
|
| 9. |
To install, reverse the removal procedure with
new
gasket. | |
